Multi-CladTM is a lightweight trapezoidal shaped roofing and walling profile designed to take long span horizontal and vertical applications. Its aesthetic appearance make it the most preferred profile by the architects all the over the world.
Multi-CladTM is the strongest profile in its class with 32mm rib height and 186mm pitch designed to take the static as well as dynamic loads. Specially best suited for heavy rain and foot traffic movement.
The full side-lap corrugation gives extra support at the panel overlap for workability during erection and a better fit for weather tightness.
Specially designed side lap anti- capillary groves, which can also be sealed using butyl based sealant tapes to give complete weather tightness from water and dust to make it most suitable roofing & walling system for environment sensitive application e.g. electronic industry, pharmaceutical industry etc.
Ridge Fixing Advantage
Multi-CaldTM one piece roof ridge panel are made from the same trapezoidal profile, which speeds installation and helps in sealing this vital area against weather.
Multi-CladTM profiles are available in concave as well as convex curved sheets to give architectural features to the building. The radius is as nominated by you down to minimum recommendation of 500 mm.
Best Suited to your needs
Multi-CladTM is available in wide range of aesthetically pleasing colours along with matching corner flashing, capping, gutter etc. to suit your need. The recommended minimum roof pitch for Multi-Clad profile is 30 (1 in 20 or 5%).
The Multi-CladTM sheets are custom rolled to any transportable length maximum upto 13 meters.
Multi CladTM Colour coated Trapezoidal Roofing steel profile having Overall Width 1015 Covered Width -930mm, Pitch 186mm, and Depth 32 mm with two stiffening ribs available in any length from 1mtr.-13 mtr.
Thickness (TCT): 0.47 mm-0.60 mm.
Option 1: Galvanized Colour Coated:
Steel: CRCA as per IS 513.
Galvanizing as per IS 277-120 gsm / 175 gsm / 275 gsm.
Polyester Paint as per IS 14246
Top Coat 18-20 µ polyester over 5-7 µ primer
Bottom Coat 5-7 µ Epoxy Coating
Shades: White, Blue, Green, Gray etc.
Option 2: Galvalume Colour coated
Steel: G550 (Mpa) high tensile, As per ASTM :- A792, AS-1397,